Thinfan 52, Airflow 11.00 (CPM), 6500 Operating Speed (RPM), 1.8 watts input power, 0.12 amp Input Current, power supply 12Vdc, electrical interface flying leads, mechanical interface square flange, temperature -55°C to + 85°C

DC Brushless Motor TRAM LL1 as used on Class 166 Under Seat Saloon Heater Fan Motor. 60 Watts @ 28 Volts DC, 2.8 Amps with an Inrush of < 6 Amps. Operating & Storage Temperatures -40°C to + 85°C. Counter clockwise rotation as viewed from the Drive Sh

DC Brushless Motor TRAM XLR11 as used on Class 165 Under Seat Saloon Heater Fan Motor. 160 Watts @ 28 Volts DC, 6 Amps with an Inrush of < 10 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise rotation as viewed from the Drive Shaft En

DC Brushless Motor TRAM XLL11 as used on Class 165 Under Seat Saloon Heater Fan Motor. 160 Watts @ 28 Volts DC, 6 Amps with an Inrush of < 10 Amps. Operating & Storage Temperatures -40°C to + 85°C. Counter clockwise rotation as viewed from the Drive

DC Brushless Motor TRAM SR20 as used on Class 165 Toilet Vent Motor. 86 Watts @ 28 Volts DC, 3.1 Amps with an Inrush of < 6 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise rotation as viewed from the Drive Shaft End, Max Speed 3200

Optifan 145 fan

Optifan 145, power supply 28Vdc, speed 6000 rpm, speed signal FPS, mechanical interface servo ring, electrical interface flying leads

Thinfan 52, operating speed 7500RPM, 28V, input power 2.8W, input current 0.10Amps, noise level 38db(A), qualification military/commercial, operating temperature -55°C / + 85°C, airflow 13.00cfm, speed signal FPS

DC Brushless Motor TRAM SL20 as used on Class 166 Air Con Extract Motor. 30 Watts @ 28 Volts DC Operating & Storage Temperatures -40°C to + 85°C. Counter clockwise rotation as viewed from the Drive Shaft End, Max Speed 2400 RPM. Fitted with 600mm Red

Hyper 75-01 fan, 3-phase 200V 400Hz, electrical interface connector, FPS

Thinfan 120, Input voltage 28Vdc, speed 11000 rpm, speed signal FPS, electrical interface flying leads

Optifan 40 Power supply: 28Vdc Electrical interface: flying leads Mechanical interface: square flange at outlet side

Optifan 75HD fan, 28Vdc, 11000rpm, speed signal FPS, servo ring, flying leads

Thinfan 120, Input voltage 28Vdc, speed 11000 rpm, speed signal FPS, speed control 0-5V, electrical interface flying leads

Thinfan 60, 12Vdc, 12000 rpm, FPS, flying leads

Optifan 75HD fan Power supply: 28Vdc Speed: 16,000rpm Electronic protection: Potting Part number: 00-85001631-001

Thinfan 120 Input voltage: 28 VDC Speed: 11000 rpm Speed Signal: LSW Electrical interface: flying leads LMB P/N: 00-85001672-001

Optifan 44 fan Power supply: 28Vdc Electrical interface: Flying leads Mechanical interface: Servo ring Speed signal: FPS

Thinfan 120, Input voltage 28Vdc, speed 11000 rpm, speed signal FPS, speed control PWM, electrical interface flying leads

OPTIFAN 45 fan custom based on 00001005 with PWM, potted electronics, shielding and bonding area Power Supply: 28VDC Speed: 14.500rpm Mechanical interface: Square flange with bonding area Electrical interface: flying leads Speed signal: FPS type 2

Optifan 75HD fan, Power supply 28VDC, Speed 16000rpm, Speed signal LSW, Mechanical interface: servo ring, Electrical interface: flying leads, Electronic protection: potting

Maximum 4P E4870-4PT 200V 400Hz TRI 200V 400Hz

Melba H Fan, 3-phase 200V 400Hz, flying leads & FPS

Prodige fan, operating speed 10,500 RPM, 200V, 400Hz AC, 3 phase, input power 38 Watts, input current 0.14 Amps, starting current 0.43 Amps, weight 0.32 Kg, noise 76 (dB(A)), airflow 93.97 cfm

Persan fan type E 10400, single phase 115V 400Hz, NSN 4140144615437 Permanent capacitor not supplied

Fan "Marathon 2", 200V / 3 phase / 400Hz. Operating speed: 22.000 rpm, Input Power: (kW) 0.078, Input Current: (Amps) 0.28, Starting Current: (Amps) 1.4, Noise: (dB(A)) 82, Flying leads

Quinoa heat exchanger

Axial fan PENSEE, 200 Volt, 400Hz, 3 phase, 7500 RPM, input power (watts) 73, Input current (amps) 0.35, starting current 1.3 Amps, noise (dB(A)) 82, airflow (cfm) 276.60

CASQUE A Fan Voltage: 3-phase 200V 400Hz Speed: 7300 rpm

"Charmeur", 2850 RPM, 115 V / 400Hz, single phase, input power 0.029 Watts, input current 0.52 Amps (nominal current), 0.57 Amps maximum current. Starting current 0.83 Amps, noise 62 (dB(A)), operating temp -45 degrees C to +85 degrees C, airflow 221.6

Lotus X E12890XT 200V 400Hz TRI 200V 400Hz

Axial Fan "Maximal 2", 3 Phase / 200VAC / 400Hz, Nominal input current: 0.22 Amps, Starting current: 0.5 Amps, Input power: 48 Watts, Nominal Speed: 21.500 rpm, Temperature range: -55 / +100 degrees.

"LAYON" AC fan, 3 phase, 200V, 400Hz, 23,000 RPM, input power 656 Watts, input current 2.10 Amps, starting current 8.5 Amps, weight 3.10 Kg, noise 93 (dB(A)), airflow 336.00 cfm

Primevere 7400 RPM fan, voltage 115v, frequency 400Hz, 3 phase, input power 20 watts, input current 0.18 amps, starting current 0.38 amps, 61dB(A), operating temperature -45degC /+85degC, airflow 63.00 cfm

Axial fan ''Media 2P5'', 115V - 1 phases -400Hz , 21500 rpm, input power 190 watts, input current 1.7 amps, starting current 4.1 amps, noise level 88dB(a)

MARATHON 2 Fan, 115V / 1 phase / 400hZ, Speed 22,000 RPM, input power 97 watts, noise 82 (dB(A)), Flying leads

Ester fan 7500 RPM (Includes Impeller), 4.72ins diameter, 400Hz, 200v /3 phases, input power (kW) 0.12, input current (amps) 0.6, starting current (amps) 3, weight 2.65lbs/1.20kg, noise 68 dB(A) (motor fan in closed oven)

"PLUTON" fan, 26Vdc, 3500 rpm, input power 8 watts, input current 0.3amps, starting current 1.34 amps, noise level 68dB(a)

"POURPIER" Fan, 12Vdc, 5,000 RPM, input power 0.009 kW, Input current 0.8 Amps, starting current 2.25 Amps, Noise 66 (dB(A))

LMB Blower "BEAUFORT", 3200 RPM, 26 Vdc, input power 330W, input current 12.70A, starting current 16A, noise 82 (dB(A)), airflow 1413.00 cfm. Drawing number 04 020 470 rev C.

Mounting kit for finger guard

Finger guard (outlet side) for Optifan 75HD 16000rpm fans

Finger guard

C Clamp Type II

Finger guard Mounting Kit for servo ring Mechanical interface: Servo ring 10-85024668-001 MOQ: 2 pcs

Optifan 70 finger guard Mechanical interface: Servo ring inlet side 10-85550027-001 MOQ: 2 pcs

Optifan 70 finger guard Mechanical interface: Servo ring inlet side 10-85550027-002 MOQ 2

Optifan 70 finger guard. Mechanical interface: Square flange outlet side 10-85550038-001 MOQ: 2 pcs

Optifan 70 finger guard Mechanical interface: Square flange outlet side 10-85550038-002 MOQ 2

Ester Impeller

Impellor EDEN T blower

Rubber insert for 00-85001412-001

Fan duct for 00-85001420-001 LMB assembly.

FAN HOUSING FABRICATION ISS.H BOOK IN CE97021

2 WAY FASTON TERMINAL ASSY, ISSUE A

SPACER FOR 00000897, Issue A

Impeller, 30900028 LMB part number

ESTER Blower 200V, 3/400Hz, 5700rpm

Axial fan ''Media 2P5'', 200V - 3 phases -400Hz , 21500 rpm, input power 160 watts, input current 0.65 amps, starting current 2.5 amps, noise level 88dB(a)

Peltier Fan 5500 RPM, 26Vdc, input power 0.007kW, Input current 0.26 Amps, weight 1Lb / 0.450Kg, noise (dB(A)) 55, military qualification, operating temperature -45degrees C to + 85degrees C. airflow CFM 49.00, speed signal F.P.S

"POURPIER" Fan, Nominal Voltage: 28Vdc, Speed: 7300 RPM, Current consumption: 0.8Amps, Power consumption: 23 Watts. Starting current: 3.5 Amps. Weight: 0.23Kg. Noise: 72 (dB(A)).

Water flow switch. Drawing reference 04018535

Pluton 24Vdc brushless fan, 3800 rpm, input power 9 watts, input current 0.4 amps, starting current 1.9 amps, noise (dB(A)) 68, FPS, flying leads, IP54,

POURPIER DC 26vdc brushless fan 5600 rpm, input power 12 watts, input current 0.46 amps, starting current 2 amps, weight 0.23kg, noise 66dB(a),drawing fig3, curve fig C, speed signal F.P.S

"PSYCHE" DC brushless fan, 12,000 rpm, 28Vdc, input power kW 0.112, input current 4 amps, starting current 5 amps, noise (dB(A)) 92

Axial Fan LORENTZ 28Vdc brushless fan, 11,800 rpm, input power 0.21kW, input current 7.5A, starting current 8A, noise 80 (dB(A)) AEI5282-70 iss 1

"MORTIER-1" Fan, 22,000 rpm, 115V - Single Phase - 400Hz, input power 16 watts, input current 0.17amps, starting current 0.17amps, noise 67 (db(A)), diameter 1.6 in - permanent capacitor 0.47uF not supplied

Prodige 1H fan, 1 phase 115V 400Hz, 10500rpm, FPS, flying leads

DC Brushless Motor TRAM LR2 as used on Class 165 Saloon Heater Motor RH. 45 Watts @ 24 Volts DC, 2.7 Amps with an Inrush of < 7 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise Rotation as viewed from the Drive Shaft End, Max Speed

DC Brushless Motor TRAM LL2 as used on Class 165 Saloon Heater Motor LH. 45 Watts @ 24 Volts DC, 2.7 Amps with an Inrush of < 7 Amps. Operating & Storage Temperatures -40°C to + 85°C. Anti Clockwise Rotation as viewed from the Drive Shaft End, Max S

DC Brushless Motor TRAM LR3 as used on Class 166 Cab Heater Motor. 77 Watts @ 24 Volts DC, 3.2 Amps with an Inrush of < 6.4 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise Rotation as viewed from the Drive Shaft End, Max Speed 2900

DC Brushless Motor TRAM SR1 as used on Class 165 Cab Heater Motor. 18 Watts @ 24 Volts DC, 1.0 Amps with an Inrush of < 3.6 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise Rotation as viewed from the Drive Shaft End, Max Speed 3200

DC Brushless Motor TRAM SR2 as used on Class 166 Saloon EXT Motor. 17 Watts @ 24 Volts DC, 0.7 Amps with an Inrush of < 1.4 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise Rotation as viewed from the Drive Shaft End, Max Speed 1800

DC Brushless Motor TRAM SR3 as used on Class 166 Saloon Toilet Extract Fan Motor. 22 Watts @ 24 Volts DC, 0.9 Amps with an Inrush of < 1.8 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise Rotation as viewed from the Drive Shaft End,

DC Brushless Motor TRAM SR4 as used on Class 165 No 8 IA Toilet Extract Fan. 24 Watts @ 24 Volts DC, 1.0 Amps with an Inrush of < 2 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise Rotation as viewed from the Drive Shaft End, Max Sp

DC Brushless Motor TRAM SL2 as used on Class 166 Saloon EXT Motor. 17 Watts @ 24 Volts DC, 0.7 Amps with an Inrush of < 1.4 Amps. Operating & Storage Temperatures -40°C to + 85°C. Ant Clockwise Rotation as viewed from the Drive Shaft End, Max Speed 1

DC Brushless "Pepite" Fan, 26Vdc, speed 3700 rpm, input power 4 watts, input current 0.15 amps, starting current 1 amp, noise 60 (dB(A))

DC Brushless Motor TRAM LR4 as used on Class 156 Motor. 77 Watts @ 24 Volts DC, 3.2 Amps with an Inrush of < 6.4 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise Rotation as viewed from the Drive Shaft End, Max Speed 2600 RPM. Pleas

DC Brushless Motor TRAM SL6 as used on Class 158 Under Seat Heater Fan Motor. 55 Watts @ 24 Volts DC, 2.3 Amps with an Inrush of < 4.6 Amps. Operating & Storage Temperatures -40°C to + 85°C. Anti-Clockwise Rotation as viewed from the Drive Shaft End,

MX150 fan, operating speed 12,200 RPM, 200V / 420Hz AC, 3 phase, input power 0.650 Watts, input current 2.40 Amps, starting current 12 Amps, weight 3.2 Kg, noise 89 (dB(A)), airflow 883.39 cfm

Axial Fan "MAXIME 2", power supply: 115v - 1phase - 400Hz, speed 21500rpm, input power 21watts, input current 0.017 amps, starting current 0.32 amps, noise 67 db(a)

MORTIER-1 fan, 22,000 rpm, 200V/3 phase/400Hz, input power 17 watts, input current 0.09amps, starting current 0.2amps, noise 67 (db(A))

Hyper 190-05 Fan, DC brushless, 10,800 RPM, 28Vdc, 1.8kW input power, 75 Amps input current, 85 Amps starting current, Noise (dB(A)) 95

OPTIFAN75, 28Vdc, 6800 RPM, input power 20W, input current 0.7 Amps, starting current 3 Amps, noise 60 (dB(A))

Axial OPTIFAN 45 - 20000rpm, 28Vdc power supply.

Maryland 1 fan 115V/ 1 Phase / 400Hz , Speed 21000 rpm, input Power 80 W, Input current 0.6 A, starting current 1.45 A, Noise 80 (dB(A)). Permanent capacitor not supplied

"MAXIMAL 2K3H" Axial Fan, power supply: 200v - 3 phases - 400Hz, speed 21500 rpm, input power 48 watts, input current 0.1 amps, starting current 0.21 amps, noise 67 db(a)

OPTIFAN 45 Axial Fan 14.500 rpm, 28 Vdc. (Typical speed for this fan is 15,000 RPM), input power 20 watts, input current 0.7 amps, starting current 1.8 amps, noise 69dB(a)

Axial Fan Optifan 45 - Power supply 28 VDC. Speed (rpm) 14500, input power (watts)20, input current (amps) 1.8, starting current (amps) 1.8, weight .16kg, noise(dB(A)) 69, Square Flange/ flying leads, fan performance sensor.

DC Brushless motor "HERTZ" 26Vdc, as per drawing 04 022 710 issue A

Optifan 44, 19000 RPM, nominal voltage 28Vdc, voltage range 16-32 Vdc, nominal input current 0.28 Amps

OPTIFAN 44, 28Vdc, 27,000rpm, input power 21watts, input current 0.8 amps, starting current 1.8 amps, noise level 80dB(A)

Optifan 45, brushless fan DC/DC internal converter, electrical interface terminal 28vdc, 18000 rpm, 2" Dia 50CFM, fans to accommodate flying leads of 300mm length, red, black and brown colours, input power 34 watts, input current 1.2 amps, starting cu

Axial Fan Optifan 45, 28Vdc, 14,500 RPM, input power 20 Watts, input current 0.7 Amps, starting current 1.8 Amps, noise (Db(A)) 69

MAXIME 2H Axial fan, Power supply: 3 phases / 200V / 400Hz, 21500 rpm, input power 21 watts, input current 0.1 amps, starting current 0.21 amps, noise 67 dB(A)

Optifan 70 Power supply: 28Vdc Speed: 22000rpm Electrical interface: flying leads Mechanical interface: servo ring Speed signal: LSW

OPTIFAN 70 fan Power supply: 28Vdc Speed: 12000rpm Electrical interface: Flying Leads Speed signal: FPS

Class 158 Underseat Motor Clockwise Rotation with 600mm cable. With Reverse Polarity protection & high Temperature protection. 24VDC Normal. The temperature range is -20 to +85°C. TRAM SR6. No part issue. PADS cat no: 98/20101 BR cat no 98/20101

OPTIFAN 45 DC Brushless fan 28Vdc, 22000 rpm, round flange, flying leads, FPS sensor.

OPTIFAN 70 DC Brushless Fan 28 Vdc, 22000 rpm, Servo rings / Flying leads, fan performance sensor, input power 40 watts, input current 1.4 amps, starting current 1.8 amps, noise 77 dB(A) **Price valid for 1**

MX150-01HD Fan, Airflow 677 CFM, shut off pressure 28.79, operating speed 15000RPM, Noise 95 dB(A), input power 1120W, input current 40A, -45°C - 85°C, 28V

OPTIFAN 40, 26vdc, 17000 RPM, Input power 9 watts, Input current 0.35 Amps, Starting current 2.2 Amps, Noise 62dB(A)

Optifan 45 DC brushless fan 28Vdc, 20000 rpm, Servo rings / Flying leads, fan performance sensor, input power 39 watts, input current 1.4 amps, starting current 2.2 amps, noise 80 dB(A)

Maximal 2PS with modified impeller

OPTIFAN 70-01 fan, 28Vdc, 10,000 Rpm, input power 5watts, input current 0.18 Amps, starting current 2.2 Amps, noise 60 (dB(A)), FPS

OPTIFAN 65 DC brushless fan 28Vdc, 15000 rpm, input power 48 watts, input current 1.4 amps, starting current 7 amps, noise 80 dB(A)

Marathon 2TS (Terminal Switch). Westlands part number EA2101V240.001. Toilet Fan Option Version.

Brushless motor with integral driver, nominal speed 1500 RPM (+/- 5%), nominal current 3.2A (+/- 10%), nominal voltage 105V typical. Refers to drawing 04 023 920 issue C.

OPTIFAN 75 HD brushless fan, 15000 rpm, input power 140 watts, input current 4.5 amps, starting current 7 amps, noise 80 dB(A)

OPTIFAN 40 DC brushless fan 26Vdc, 26000 rpm, input power 26 watts, input current 1 amps, starting current 1.8 amps, noise 72 dB(A).

Optifan 44 DC brushless fan 28Vdc, 15000 rpm, input power 5 watts, input current 0.23 amps, starting current 2.3 amps, noise 68 dB(A)

OPTIFAN 45, 28Vdc, 14,500 RPM, input power 20 Watts, input current 0.7 Amps, starting current 1.8 Amps, noise 69 (dB(A))

Optifan 45 Power supply: 28Vdc Speed:18000rpm Electrical interface: flying leads Mechanical interface: Servo ring Speed signal: LSW

Optifan 45 DC brushless fan 28Vdc, 20000 rpm, input power 39 watts, input current 1.4 amps, starting current 1.8 amps, noise 80 dB(A). Square flange / Flying leads, fan performance sensor

Optifan 45 DC brushless fan 28Vdc, 20000 rpm, input power 39 watts, input current 1.4 amps, starting current 1.8 amps, noise 80 dB(A), servo rings / flying leads, low speed warning

Optifan 45 DC brushless fan 28Vdc, 22000 rpm, input power 42 watts, input current 1.5 amps, starting current 1.8 amps, noise 85 dB(A)

OPTIFAN 65 DC brushless fan 28Vdc, 9500 rpm, input power 12 watts, input current 0.4 amps, starting current 1.8 amps, noise 70 dB(A)

OPTIFAN 65 DC brushless fan 28Vdc, 18000 rpm, input power 84 watts, input current 3 amps, starting current 7 amps, noise 84 dB(A)

OPTIFAN 65 DC brushless fan 28Vdc, 22000 rpm, input power 154 watts, input current 5.5 amps, starting current 7 amps, noise 89 dB(A)

OPTIFAN 70 DC brushless fan 28Vdc, 10000 rpm, input power 5 watts, input current 0.18 amps, starting current 1.8 amps, noise 60 dB(A) with fan performance sensor

OPTIFAN 70 DC brushless fan 28Vdc, 10000 rpm, input power 5 watts, input current 0.18 amps, starting current 1.8 amps, noise 60 dB(A) with Low speed warning

OPTIFAN 70, 28Vdc, speed 12000 rpm, speed signal FPS, mechanical interface servo ring, electrical interface flying leads, input power 11 watts, input current 0.4 amps, starting current 2.2 amps, noise 64dB(A),

Axial Fan OPTIFAN 70, 28Vdc, 22,000 RPM, input power 40 Watts, input current 1.4 Amps, starting current 1.8 Amps, noise 77 (dB(A)).

OPTIFAN 75 DC brushless fan 28Vdc, 6800 rpm, input power 20 watts, input current 0.7 amps, starting current 3 amps, noise 60 dB(A) Terminal block connection

OPTIFAN 75 DC brushless fan 28Vdc, 6800 rpm, input power 20 watts, input current 0.7 amps, starting current 3 amps, noise 60 dB(A) flying lead connection

DC Brushless ""OPTIFAN 75"". Speed: 8.600RPM"" Fan. Power supply: 28 VDC. Input power: 28W. Starting current: 4.5A. Noise (dB(A)): 63. Leads / Square flange.

Optifan 75HD Fan, 28Vdc, 15,000 RPM, Input power 140 (Watts), input current 5 Amps, starting current 7 Amps, noise 80 (dB(A)), FPS

Optifan 75HD Power supply: 28Vdc Speed:15000rpm Electrical interface: flying leads Mechanical interface: Square flanges Speed signal: LSW

Optifan 65, 22000 RPM, 28Vdc, input current 154 Watts, input current 4.6 Amps, starting current 7 Amps, noise (dB(A)) 89, speed signal LSW

Hyper 80-04 Fan, 28Vdc

Pluton fan 6,000 RPM, 28Vdc, voltage range 16-32 Vdc,Input power 9 w, input current 1.70 A, starting current 1.9 A, noise (dB(A)) 68, FPS

Hyper 115-03 fan, 28Vdc, 13,000 RPM, input power 630 Watts, input current 22.5 Amps, starting current 25 Amps, noise dB(A) 89

OPTIFAN 44, 9,500 RPM, 12Vdc, voltage range 10-14 Vdc, nominal input current 0.25 Amps, inrush current 1.2 Amps, temperature range -40 / +85 degrees C

Hyper 95-01 Fan, 28Vdc, 22,500 RPM, Input power 672 Watts, input current 24 Amps, starting current 30 Amps, noise 90 dB(A)

Optifan 45SD, power supply 28Vdc, speed 15000 rpm, electrical interface: flying leads, mechanical interface 3 points mounting: see ICD 04-85024990-001, Airflow 52.98 cfm, 42 watts input power, 1.50 A Input Current, Temperature -55°C to 85°C

Axial fan OPTIFAN 75HD, 16,000RPM Airflow 294 cfm, 182 W Input Power, 6.50 A Input Current Temperature: -55°C to 85°C Mechanical interface: servo ring Electrical interface: flying leads Electronic protection: varnish Surface finish: black chromic a

Optifan 75HD Power supply: 28Vdc Airflow 294 CFM Input Power: 182 Watts Input Current: 6.50 A Operating Speed: 16000rpm Temperature: -55°C to 85°C Electrical interface: Flying leads Mechanical interface: Servo rings Electronic protection: pottin

DC Brushless Motor TRAM LR1 as used on Class 166 Under Seat Saloon Heater Fan Motor. 77 Watts @ 28 Volts DC, 2.8 Amps with an Inrush of < 5 Amps. Operating & Storage Temperatures -40°C to + 85°C. Clockwise Rotation as viewed from the Drive Shaft End,

Axial fan OPTIFAN 75HD, Operating Speed 16,000RPM Airflow 280 CFM Input Power: 126 Watts Input Current: 4.50 A Temperature: -55°C to + 85°C Power supply 28Vdc Mechanical interface: servo ring Electrical interface: flying leads with over shieldi

Optifan 70 Fan Power Supply 28Vdc Operating Speed: 22000rpm Airflow: 120 CFM Input Power: 40 Watts Input Current: 1.40 A Temperature: -55°C to + 85°C Electrical Interface: flying leads Mechanical Interface: Servo ring electronic protection potti

Thinfan 52, operating speed 3000 rpm, 28Vdc, input power 2W, input current 0.10 amps, noise level 32dB(A), qualification Military MIL-STD-810, operating temperature -55 deg C/+85 deg C, airflow 7.40 cfm

Thinfan 52 Fan - PWM, 28Vdc, 7500rpm, speed signal FPS, flying leads

WF/DC Converter

Optifan 75, Power supply: 26Vdc Electrical interface: Connector Mechanical interface: Servo ring Speed signal: FPS

00-85001773-001 Power Supply: 28VDC, Speed: 11000rpm, Speed signal: FPS, Mechanica lnterface: servo ring Electrical interface: Flying leads Operating temperature: -55°C +85°C

PLUTON AXIAL FAN 24 VDC ISSUE A

Optifan 40, 26Vdc power supply, 17000 speed (rpm), 9 input power (watts), 0,35 input current (amps), 2,2 starting current (amps), 0,08/0,18 weight (Kg/Lbs), 62 noise (dB(A))

Optifan 44-02 28vdc

Optifan 30

Optifan 40 Power Supply: 28VDC Speed: 19,700RPM Nominal Current: 0.35 Amps. (0.4 Amps Max) Starting Current: 1 Amp Max for 3 to 4 Seconds until Fan reaches Full Speed Electrical Interface: Heat Shrunk Protective Sleeve over Doubled Braided Tinne

Finger guard for Optifan 44 LMB P/N 00001283

Media 2P5 TG fan

OPTIFAN 70 DC Brushless Fan 28 Vdc, 22000 rpm, Servo rings / Flying leads, fan performance sensor, input power 40 watts, input current 1.4 amps, starting current 1.8 amps, noise 77 dB(A) MS Version of Part Number 0001118

OPTIFAN 70 DC Brushless Fan 28 Vdc, 22000 rpm, Servo rings / Flying leads, fan performance sensor, input power 40 watts, input current 1.4 amps, starting current 1.8 amps, noise 77 dB(A) Mechanically strengthened Version of Part No. 00001118

Optifan 45 fan Power supply: 31Vdc Speed: 22000rpm Mechanical interface: square flange with bonding at inlet side Electrical interface: flying leads with Glenair mighty mouse connector Speed signal: FPS Finger guard: yes (10-85024824-001) Alterna

LMB Optifan 45, power supply 28Vdc, nominal speed 23000rpm, mechancial interface round flange, electrical interface flying leads FPS fan performance sensor, military qualification, LMB ICD reference 04-85030520-001

Customised Optifan 145NMS: Power Supply: 28V DC Nominal Speed: 6 300 rpm Mechanical interface: Double round + square flange Electrical interface: Shielded cable, FPS Fan Performance Sensor Speed control: 0-5 VDC Speed control Qualification: Militar

Optifan 75 HD MS, 28VDC, 15,000rpm, double square flange, shielded cable, LSW low speed warning, underspeed, thermal defect, locked shaft, mechanically reinforced, bonding

Optifan 65 MS, 28VDC, 22,000rpm, air inlet none, air outlet square flange, flying leads, LSW low speed warning, underspeed, locked rotor, mechanically reinforced

Optifan 65, 28 VDC, 22,000rpm, Air inlet none, air outlet square flange, flying leads, LSW low speed warning, Underspeed, rotor locked

Optifan 75 28 Vdc 1600rpm, Flying leads, Square Flange

Customised Pourpier fan, new part number to be advised: Power supply: 24Vdc Nominal speed: 7 300 rpm Dimensions: 92 x 92 x 25,4mm Mechanical interface: Double square flange Electrical interface: Flying leads Other characteristics: Bonding, Paint Q

Finger Guard COTS Optifan 75 HD Part No 0085001354-001

Finger Guard COTS Optifan 75 HD P/N 00-85001349-001

Optifan 45 Operating Speed 9500RPM, 28VDC, Input Power 6.44 Watts, Input current 0.23 amps, Starting current 2.2 Amps, Airflow (l/s/CFM) 10.8/23, Pressure Shut Off (Pa/Inch H2 O) 174/0.7, Square Outlet Mechanical Interface, Electrical Interface : Termi

Thin Fan 120 Power Supply 24vdc Nominal Speed 8000rpm Flying Leads IP54

OPTIFAN 70 DC Brushless Fan 28 Vdc RoHs Compliant version of Part Number 00001118 Drawing 00-85001998-001 (04-85031560-001)Rev - Mar 2022

Thinfan 50 Nominal Speed 7500rpm, Double Square Flange, Flying leads, FDP Fan performance sensor, IP Rating : IP68

OPTIFAN 40 fan, Power supply 26VDC, Electrical interference Flying leads, Mechanical interference Servo ring, Speed signal FPS

Axial Fan OPTIFAN 75HD - 16,000 rpm. mechanical interface: Servo ring, electrical interface: Flying leads, electronic protection: Varnish

OPTIFAN 75HD Fan, 28VDC, 16000rpm, Flying leads, square flange

HYPER 95-01 Fan, Power supply 27VDC,Speed 23000rpm, Electrical interference Connector

Optifan 70 fan, Power supply: 28VDC, Speed 15000rpm, Speed signal LSW, Electrical interface: Flying leads

Optifan 45 fan(LPR2629) Power supply: 31Vdc Speed: 22.000rpm Mechanical interface: square flange with bonding at inlet side Electrical interface: flying leads Speed signal: FPS Finger guard: No

Optifan 45 fan (LPR2629+finger guard) Power supply: 31Vdc Speed: 22.000rpm Mechanical interface: square flange with bonding at inlet side Electrical interface: flying leads Speed signal: FPS Finger guard: Yes (10-85024824-001) 00-85001420-001

Optifan 45 fan Power supply: 31Vdc Speed: 22000rpm Mechanical interface: square flange with bonding at inlet side Electrical interface: flying leads with Glenair mighty mouse connector Speed signal: FPS Finger guard: yes (10-85024824-001)

OPTIFAN 75HD fan, Power Supply: 28VDC Speed: 16.000rpm, Electrical interface: flying leads with over shielding, Speed signal: LSW Electronic protection: varnish Surface Finish: Black anodising MIL-A-8625 type IC Class 2 or IIB Class 2 except bonding

OPTIFAN 75HD fan, Power Supply: 28VDC Speed: 16.000rpm, Electrical interface: flying leads with over shielding, Speed signal: LSW Electronic protection: varnish Surface Finish: Black anodising MIL-A-8625 type IC Class 2 or IIB Class 2 except bonding

Optifan 45 fan complete assembly, fan attached with fan duct Power supply: 31Vdc Speed: 22000rpm Electrical interface: connector Speed signal: FPS Finger guard: yes (10-85024824-001)

Optifan 70 Fan ROHS (Lead-free) compliant Power Supply: 24VDC Speed: 15000rpm Speed signal: FPS Electrical interface: Flying leads 00-85001769-001

OPTIFAN 75HD MS fan Power Supply: 28VDC Speed: 15000rpm Speed signal: FPS Mechanical interface: servo ring Electrical interface: Flying leads Operating temperature: -55°C +75°C

LMB BEAUFORT BLOWER ISSUE C